LC Snow (Schnee) on vertical equipment

Here you can post your question about ROHR2.
Antworten
pancevo
Beiträge: 9
Registriert: Di 24. Mär 2015, 11:58

LC Snow (Schnee) on vertical equipment

Beitrag von pancevo » Di 31. Mär 2020, 10:21

Hello,

How to include snow on vertical equipment?
Snow on cylinder.png
If we design vertical equipment (cylinder) as a large diameter pipe or as a structural element (round shape) Rohr2 will not consider snow load since it is in vertical position.

Do we have to make LC Occasional primary loads "Snow" and to add point load (Q = Sk * A) on top of cylinder?

For example Q=0.65 (kN/m2) * 2 (m2) = 1.3 kN downward point load
Sie haben keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.

Benutzeravatar
rohr2support
Beiträge: 422
Registriert: Mi 14. Sep 2011, 08:23

Re: LC Snow (Schnee) on vertical equipment

Beitrag von rohr2support » Di 31. Mär 2020, 10:44

Hi

You are right that ROHR2 will apply snow loads on horizontal pipes but not on the end.
So in order to include the snow load at the silencer top, you need to add a point load in the load-case snow.

Best regards

Rohr2 Support

pancevo
Beiträge: 9
Registriert: Di 24. Mär 2015, 11:58

Re: LC Snow (Schnee) on vertical equipment

Beitrag von pancevo » Di 31. Mär 2020, 12:48

Thanks a lot!

Antworten

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 8 Gäste