Hello Support Team,
I need to use branch SIF for weldolet fitting. ( header & branch size 200 DN & 50 DN respectively)
Which kind of component according to EN13480 is applicable.
Regards
Regarding Weldolet
-
- Beiträge: 26
- Registriert: Mi 28. Mär 2012, 08:15
Regarding Weldolet
With Regards
Aditya Singh
Aditya Singh
- rohr2support
- Beiträge: 457
- Registriert: Mi 14. Sep 2011, 08:23
Re: Regarding Weldolet
Hi
The SIF for EN13480-3 are in Annexe H in table H1 and H3. These are more or less copies of ASME B31.1 and B31.3.
The table H1 has only 1 SIF for the resultant moments: wheras H3 has inplane and outplane SIFs. There is no limitation in EN13480-3 on the use of these tables.
Weldolets are only available in table H3. The abbreviation in ROHR2 is TWA and it corresponds to line 9 in table H3: Best regards
ROHR2 Support
The SIF for EN13480-3 are in Annexe H in table H1 and H3. These are more or less copies of ASME B31.1 and B31.3.
The table H1 has only 1 SIF for the resultant moments: wheras H3 has inplane and outplane SIFs. There is no limitation in EN13480-3 on the use of these tables.
Weldolets are only available in table H3. The abbreviation in ROHR2 is TWA and it corresponds to line 9 in table H3: Best regards
ROHR2 Support
Sie haben keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
-
- Beiträge: 26
- Registriert: Mi 28. Mär 2012, 08:15