Regarding Weldolet

Here you can post your question about ROHR2.
Antworten
aditya0608
Beiträge: 26
Registriert: Mi 28. Mär 2012, 08:15

Regarding Weldolet

Beitrag von aditya0608 »

Hello Support Team,

I need to use branch SIF for weldolet fitting. ( header & branch size 200 DN & 50 DN respectively)
Which kind of component according to EN13480 is applicable.

Regards
With Regards
Aditya Singh
Benutzeravatar
rohr2support
Beiträge: 455
Registriert: Mi 14. Sep 2011, 08:23

Re: Regarding Weldolet

Beitrag von rohr2support »

Hi

The SIF for EN13480-3 are in Annexe H in table H1 and H3. These are more or less copies of ASME B31.1 and B31.3.
The table H1 has only 1 SIF for the resultant moments:
TableH1.jpg
wheras H3 has inplane and outplane SIFs.
TableH3.jpg
There is no limitation in EN13480-3 on the use of these tables.
Weldolets are only available in table H3. The abbreviation in ROHR2 is TWA and it corresponds to line 9 in table H3:
TableH3_TWA.jpg
Best regards

ROHR2 Support
Sie haben keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
aditya0608
Beiträge: 26
Registriert: Mi 28. Mär 2012, 08:15

Re: Regarding Weldolet

Beitrag von aditya0608 »

Thanks a lot
With Regards
Aditya Singh
Antworten