Diferent allowable stresses for the same pipe
Verfasst: Do 21. Jun 2018, 17:08
Good Afternoon,
I was checking my results and saw that the allowable stresses for the expansion load case is varying along the pipe. Some were considered as 86.4 while others 206.4MPa. I also found that the values considered as Allowables for the material SA672 B60 at temperature 70ºC was rather low 86.4MPa. Do you have any idea why this is hapenning?
Thank you for the help.
I was checking my results and saw that the allowable stresses for the expansion load case is varying along the pipe. Some were considered as 86.4 while others 206.4MPa. I also found that the values considered as Allowables for the material SA672 B60 at temperature 70ºC was rather low 86.4MPa. Do you have any idea why this is hapenning?
Thank you for the help.