Hi
How can I enter the Axial, lateral and angular spring rate of a lateral expansion joint menu.
In the lateral expansion joint menu there is just Cr, CI , Cp and Ct that have a completly different definition from spring rate in different direction, or may be I undrestand it wrong!
Best regards
/Ali
spring rate for Lateral expansion joint
-
- Beiträge: 27
- Registriert: Mi 20. Dez 2017, 08:07
spring rate for Lateral expansion joint
Sie haben keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
- rohr2admin
- Administrator
- Beiträge: 631
- Registriert: Di 13. Sep 2011, 14:03
Re: spring rate for Lateral expansion joint
Hi,
if you use the function "lateral expansion joint", the values you have to/ can enter are defined as following (press F1 in the dialogue and it will lead you to the manuel):
Best regards,
ROHR2support
if you use the function "lateral expansion joint", the values you have to/ can enter are defined as following (press F1 in the dialogue and it will lead you to the manuel):
- Cr: pressure-dependent lateral friction resistance (e.g. parameter cr from the HYDRA-manual)
- Cl: elastic lateral bellow resistance, pressure-independent (e.g. parameter cλ from the HYDRA- manual)
- Cp: elastic lateral bellow resistance, pressure-dependent (e.g. parameter cp from the HYDRA- manual)
- CT: elastic bellow resistance for torsion
Best regards,
ROHR2support