Weldolet

Here you can post your question about ROHR2.
Antworten
Ioana
Beiträge: 17
Registriert: Di 12. Aug 2014, 13:27

Weldolet

Beitrag von Ioana »

Hey all

In my project I would like to be able to add a weldolet.
I could not find any setting which will allow me this in Rohr2.
My question is, how Rohr2 handles weldolets? Is it possible to insert a weldolet?
Thank you!

Best regards,
Ioana
Ioana
Beiträge: 17
Registriert: Di 12. Aug 2014, 13:27

Re: Weldolet

Beitrag von Ioana »

I forgot to mention that the weldolet should be after EN13480.
Best regards,
Ioana
Benutzeravatar
rohr2support
Beiträge: 455
Registriert: Mi 14. Sep 2011, 08:23

Re: Weldolet

Beitrag von rohr2support »

You can use Weldolet (TWA) for EN 13480.
But you have to use alternative equations.
EN-13480 alterantive Gl.jpg
Sie haben keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Ioana
Beiträge: 17
Registriert: Di 12. Aug 2014, 13:27

Re: Weldolet

Beitrag von Ioana »

Ok.
I will do that.
Is this change by using EN13480 alternativ giving other changes in the calculation, or is just the alternative in order to use some different components (as weldolet) in the model?
Thank you for the help!
Best regards,
Ioana
Benutzeravatar
rohr2admin
Administrator
Beiträge: 631
Registriert: Di 13. Sep 2011, 14:03

Re: Weldolet

Beitrag von rohr2admin »

Hi,

you can have a look in the stress-manual, there is a description of the different equation:
alt_eq.JPG
The main differenz in the alternative equation is, that the components of the moments (inplane/outplane/torsion) with the according sif can be considered in the calculation.

Best regards,
ROHR2support
Sie haben keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
TobiK
Beiträge: 20
Registriert: Mo 11. Jun 2012, 09:48

Re: Weldolet

Beitrag von TobiK »

Wo muss ich in Version 32.1 das Häkchen setzen, damit Rohr2 mit Weldolets rechnet?
Benutzeravatar
rohr2admin
Administrator
Beiträge: 631
Registriert: Di 13. Sep 2011, 14:03

Re: Weldolet

Beitrag von rohr2admin »

Hallo,

bei er aktuellen Version hat sich die Bezeichnung etwas geändert, da wir uns nun direkt auf die entsprechende Tabelle der EN13480 beziehen:
h3.JPG
MfG
ROHR2support
Sie haben keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
pancevo
Beiträge: 9
Registriert: Di 24. Mär 2015, 11:58

Re: Weldolet

Beitrag von pancevo »

For EN13480:

in one of previous Rohr2 versions (31.2), in order to force Weldolet (TWA) to appear in component EN13480 list:

Component menu.png

we had to first click on "Use alternative equation with ii and io from table H.3"

h3.JPG

Now, I understand that from version (32.1) we don't need to first click on "Use alternative...H.3", and that TWA is already in component EN13480 menu

The question is:
In version 33.0, If we use TWA from component EN13480, and box "Use alternative...H.3" is NOT selected is it still correct for stress calculation of Weldolet?
What it means if we use TWA and NOT select "Use alternativ...H.3"?

Or do we still need to select "Use alternative..." in order to properly calculate Weldolet?
Sie haben keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Benutzeravatar
rohr2support
Beiträge: 455
Registriert: Mi 14. Sep 2011, 08:23

Re: Weldolet

Beitrag von rohr2support »

Hi

From version 33.0 we allow to mix between the SIFs from Table H1 (singel SIF) and H3 (inplane outplane SIF).
You no longer need to explicitly ask for the separate equations to be able to use the weldolets in EN13480.
In this case the higher SIF is used for the resultant moment for the elements from H3.

Best regards

ROHR2 Support
pancevo
Beiträge: 9
Registriert: Di 24. Mär 2015, 11:58

Re: Weldolet

Beitrag von pancevo »

Thank you very much!
Antworten