changing second flange type

Here you can post your question about ROHR2.
Antworten
arshia43
Beiträge: 27
Registriert: Mi 20. Dez 2017, 08:07

changing second flange type

Beitrag von arshia43 »

Hi
In my flange analysis, I have some flanges that just one of them exist in the model and Rohr2 decing on the second one. (like flanges that connect to the valve).
2.png

But now I defined one with Loose flange and Rohr 2 chosen the second one as a Weld neck flange and I not change it.
4.png
I ever tried to delete the section and do them again, but as long as the node number exist it will be teh same type.

Is there any way to fix it?

Best regards
/Ali
Sie haben keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Zuletzt geändert von arshia43 am Mo 19. Mär 2018, 10:06, insgesamt 1-mal geändert.
arshia43
Beiträge: 27
Registriert: Mi 20. Dez 2017, 08:07

Re: changing second flange type

Beitrag von arshia43 »

I t works by delting the whole section and creating that again.

That can be boring job as I have aslmost 20 valves like that.

Best regards
/Ali
Benutzeravatar
rohr2admin
Administrator
Beiträge: 631
Registriert: Di 13. Sep 2011, 14:03

Re: changing second flange type

Beitrag von rohr2admin »

Hi,

the best solution would be to already define the second flange in the ROHR2 model. Than you would have to define the instrument a bit shorter and also add the flange. Like this you can select the type, material, etc. of the flange and don't have to change it in the flange dialogue.

Best regards,
ROHR2support
Antworten